Cemer Jointing Motor
CEMER BLOCK JOINTING ADHESIVE is a powder based dry adhesive for laying AAC blocks, fly ash bricks, Cement blocks and red clay bricks. Manufactured under controlled conditions for uniform consistency, CEMER BLOCK JOINTING ADHESIVE is a factory prepared all aggregates and water based eco friendly Polymers. Its have no materials that are harmful to the health of the applicators.
Advantages
- Eco friendly product with less carbon footprint
- Easy to make and use
- High strength adherence
- Consistency of material and quality
- Save time & money
- Easy to make and use
- No curing required
- Fast setting jointing
- mortar Thin bed mortar for increased time efficiency
- Less water required for preparation
Technical Specifications
|
RECOMMENDED THICKNESS
3mm |
CONSUMPTION
4-5 kg/ sq. m |
USE
6 Months from the date of manufacturing |
COLOR
Grey |
PACKAGING
40 kg |
MAXIMUM TIME FOR APPLICATION
2 Hours at 27°C |
STORAGE
Dry & Covered place |
WET DENSITY
1.65kg/lt |
COMPRESSIVE STRENGTH
8N/mm2 (Minimum) after 28 days |
Instructions For Application
- CEMER BLOCK JOINTING ADHESIVE used must we clean & free of dirt & grease of surface
- Pre wet the block before use the adhesive.
- Prepare adhesive take 20-30% water with 70% powder
- Place the first line block on a conceit slab using cement mortar
- CEMER BLOCK JOINTING ADHESIVE should be applied in a thin Layer to ensure uniform thermo insulation of the block bing laid
- You can plastering the wall after 24 hours of constructing the wall
Notes
- Stacked 8 bag high maximum.
- It should be used within 6 month from date of manufacture.
- Do not applied on surface temperature less then 5°c.
- Make sure that the first layer of blocks laid is properly fixed with perfect alignment.
- When you plastering the wall spray water on the wall
INTERESTED IN OUR PRODUCTS ?